Uniphone 1150 - Handset Volume (Amplification); Inductive Coupler; Turning off the Ringer

14
•
SET-UP
Handset volume (amplification)
The handset volume setting has three steps: minimum; medi-
um, and maximum. When you change the setting, you will see
MIN, MED, or MAX on the display.
To change the setting, pick up the handset and press the
key. Each time you press the key, you move the setting up
one step. After MAX, you go back to MIN again. The setting
returns to MIN after you hang up. You must change the setting
each time you make a call.
Inductive coupler
This feature of the Uniphone 1150 improves the sound quality
for people who use hearing aids. When you want to make or
answer a call, switch your hearing aid to ‘T’.Adjust the handset
volume until you get the best sound quality.
Turning off the ringer
You can adjust the ringer volume from Lo to Hi or turn off the
ringer entirely.
On the back of the Uniphone 1150, there is a ringer switch.
Move the switch to the setting you prefer.
Vol
Vol