© 2024 All rights reserved, Unitree Robotics 23
1) Confirm whether the basic operation function of the rocker is normal.
2) Confirm whether the current power is sufficient
Confirm whether the current power is sufficient.
Listen carefully with ears to confirm that the cooling fan works normally and there is no
sound such as scratching.
Battery pack maintenance
1) Never charge the battery pack in an environment where the temperature is too high or too low
2) Do not store the battery in environments where the ambient temperature exceeds 0°C to 40°C.
3) Do not overcharge the battery pack as this will cause damage to the cells.
4) If you do not use the battery for a longer period of time, please check the remaining battery
power regularly, if the power is less than 30%, please charge the battery to 70% before continuing to
store. So as not to over-discharge the battery and damage the battery.
⚫ It is recommended to do the above inspection before each use!
⚫ If any parts are damaged and need to be replaced, please contact Unitree Robotics after-sales service in time!
FR DE IT NL
BE LU DK IE
GB GR ES PT
FI AT SE PL
HU CZ CY SI
SK LV LT EE
BG RO MT HR
To Next Page
Loading...
