Universal Audio Ampex ATR-102 User Manual

UAD Powered Plug-Ins Manual - 178 - Chapter 17: Lexicon 224
Default
Parameter
Values
Table 15 below lists the default values of all available parameters for each
program.
Lexicon 224
Latency
The Lexicon 224 uses an internal resampling technique to facilitate its sonic
quality. This resampling results in a slightly larger latency than other UAD
plug-ins. See Chapter 9 “UAD Delay Compensation” in the UAD System Man-
ual for more information.
Table 14. Lexicon 224 Outputs Used With Monophonic Output
Program Output(s) Program Output(s)
1. Small Concert Hall B A 6. Small Concert Hall A A
2. Vocal Plate A + C 7. Room A A
3. Large Concert Hall B A 8. Constant Density Plate A A
4. Acoustic Chamber A + C 9. Chorus A A + C
5. Percussion Plate A A + C
Table 15. Lexicon 224 Default Parameter Values
Program Bass Mid Crossover
Treble
Decay
Depth Diffusion
Pre-
delay
Enhance
Pitch
Shift
Decay
Opt.
1. Small Concert Hall B 3.0 2.0 540Hz 4.40 23 21 024 02 01 05
2. Vocal Plate 2.2 2.2 1kHz 10.9 00 04 000 02 01 05
3. Large Concert Hall B 3.4 2.6 540Hz 4.00 21 01 024 02 01 05
4. Acoustic Chamber 2.8 2.2 1kHz 6.60 00 N/A 025 02 01 05
5. Percussion Plate A 2.2 2.2 1kHz 10.9 00 37 000 02 01 05
6. Small Concert Hall A 3.0 2.0 540Hz 6.60 23 28 024 02 01 05
7. Room A 1.8 1.8 540Hz 4.40 23 24 024 02 02 05
8. Constant Density Plate A 1.8 1.8 540Hz 10.9 23 37 005 07 01 N/A
9. Chorus A N/A N/A N/A N/A N/A 22 012 02 02 N/A

Universal Audio Ampex ATR-102 Specifications

General

Brand	Universal Audio
Model	Ampex ATR-102
Category	Recording Equipment
Language	English