UAD Powered Plug-Ins Manual - 394 - Chapter 45: Studer A800
Primary &
Secondary
Controls
The primary controls (those that are typically most
used) are on the main panel at the bottom portion
of the interface. Additional (typically less used)
controls are available on the secondary panel.
The secondary panel (see Figure 128) is ac-
cessed by clicking the Studer A800 label or the
“OPEN” text label above it.
For detailed descriptions of the parameters, see “Primary Controls” on
page 395 and “Secondary Controls” on page 398.
Figure 128. The Studer A800 plug-in window with exposed secondary controls
To Next Page
Loading...
Need help?
General
