Apollo Solo Manual Getting Started 14
Getting Started
Overview
Before you can use Apollo Solo, you need to complete these steps:
1. Connect Apollo Solo to your computer with a Thunderbolt
™
3 cable (not included)
2. Download and install the latest UAD software and UAD Console via UA Connect
3. Register your Apollo Solo hardware
4. Authorize your UAD plug-ins
Additionally, you'll want to learn these essential Apollo Solo operations:
• Connect to Input Sources and Monitor System – How to connect your audio gear.
• Setting Hardware Input/Output Levels – Learn how to adjust Mic/Line/Instrument
input gain levels and monitor/headphone output volume levels.
This chapter will guide you through these procedures. For assistance, see the Technical
Support page.
Apollo Solo System Requirements
Note: For operating system and storage requirements, and complete compatibility
information, please visit help.uaudio.com.
• Mac or Windows computer with available Thunderbolt 3 port
• Thunderbolt 3 cable (not included)
• Internet connection to download software and authorize UAD plug-ins
• Quad Core i7 or better processor recommended
To Next Page
Loading...
