Uponor Smatrix Wave User Manual

System clock
To facilitate accurate log data, scheduling and different
timer settings, the controller receives the correct time
and date from one of the input devices (touch screen,
timer, programmable thermostat etc). The clock can be
set to automatically switch between summer and winter
time (Wave PLUS with an interface only).
MicroSD card (Wave PLUS only)
Uponor Smatrix Wave PLUS uses a microSD card for
cloning (settings), automatic backup (settings and
thermostat registration data), manual restoration of
backup, data logging (room data, controller data,
system data and events) and upgrading software.
Heat pump integration (Wave PLUS only)
The controller can connect to selected heat pumps and
adjust the supply temperature to the system.
This function is only available in selected countries,
contact a local Uponor office for more information.
See heat pump documentation for more information.
Room check (Wave PLUS with interface
only)
Room check is a diagnostic function detecting whether
a room thermostat is installed in the right room.
See section 14.7 Settings > Room check for more
information.
Room bypass (Wave PLUS with interface
only)
Up to a maximum of two rooms, for each controller, can
be selected to act as a bypass in the system.
See section 14.7 Settings > Room bypass for more
information.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
17
UPONOR SMATRIX WAVE/WAVE PLUS · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Wave Specifications

General

Brand	Uponor
Model	Smatrix Wave
Category	Floor Heating Systems
Language	English