Uponor Smatrix Wave User Manual

11.5 Factory reset
Factory reset sets all parameter values to default
settings.
NOTE!
Do not factory reset the thermostat if not
absolutely needed.
NOTE!
A factory reset removes the registration data
from the thermostat.
2
1
3
4
T-165T-163
To factory reset an analogue thermostat:
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Gently press and hold the registration button on the
thermostat, release when the demand LED starts
flashing.
4. Change the Disable timer switch twice, regardless of
starting position.
5. The thermostat is now reset to factory default.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
57
UPONOR SMATRIX WAVE/WAVE PLUS · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Wave Specifications

General

Control	Wireless
Communication	RF 868 MHz
User Interface	Touchscreen
Range	Up to 30m in open space
Battery Life	Thermostat battery life up to 2 years
Operating Temperature	0°C to +40°C