Upright X Series - Page 19

19 “Translation of the original instruction”
4. Maintenance Check Report
Model
Serial number
Date
Machine owner
Inspector (please write in block letters)
Inspector signature
Inspector duties
Inspector's office
Copy this report for use with each check.
Select the appropriate checklist according to the type of inspection.
Every day or every 8 hours
Check: A
Every quarter or every 250 hours
Check: A+B
Every six months or every 500 hours
Check: A+B+C
Every year or every 1000 hours
Check: A+B+C+D
Every two years or every 2000 hours
Check: A+B+C+D+E
After completing each inspection procedure, mark the corresponding box.
Use the step-by-step check program in this section to learn how to check.
If any of the inspections are marked as "N", the machine is marked, repaired and
rechecked and reinspected. After repair, mark the box with "R".
Legend
Y = Yes, acceptable
N = No, stop using