What to do if error “E72” appears on the Utax CD 1016 display?
If “E72” appears on the copy quantity display, remove the originals from the Document Processor, replace the originals on the Original Table after exiting the front and back copying, 2-Sided copy, 2 in 1, 4 in 1 or Sort Mode and resume copying.
General| Print Resolution | 600 x 600 dpi |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Copy Magnification | 25-400 % |
| Print Speed | 16 ppm |
| Copy Speed | 16 ppm |
| Paper Capacity | 250 sheets |
Identifies safety labels attached to the product for preventing accidents.
Safe connection and grounding procedures to prevent fire or electric shock.
General safety warnings during operation to prevent fire or electrical shock.
Instructions for duplex copying from various original types.
Managing copies by department using codes for tracking usage.
Configuring default operational parameters for the copier.
Step-by-step guide to modify the copier's default settings.
Troubleshooting based on specific error codes shown on the display.
General troubleshooting for issues not related to error codes.
Procedures for clearing paper jams from various locations in the copier.
Instructions for cleaning various copier parts like platen and covers.
Procedure for replacing the toner and waste toner consumables.
To Next Page
