Preparations
2-13
15
Press the # key.
16
Enter the next block of 3 digits of the address in the
highlighted area.
17
Continue the same procedure for the other 2 blocks.
18
Press the Enter key.
Next, set the subnet mask.
Registering Subnet Mask
To register the subnet mask, continue the procedure from step 18 above.
1
Press the S key or the T key to select Subnet Mask.
2
Press the Enter key.
3
Use the same procedure as steps 14 to 17 of IP
address setting to input the address.
4
Press the Enter key.
Next, set the default gateway.
Registering Default Gateway
To register the default gateway, continue the procedure from step 4 above.
1
Press the S key or the T key to select Gateway.
2
Press the Enter key.
3
Use the same procedure as steps 14 to 17 of IP
address setting to input the address.
4
Press the Enter key.
5
When you finish making all of the network setting, press the Reset key. The message display
returns to the printer basic screen.
IP Address
10 0..00 .
DHCP
IP Address
TCP/IP Setting
Subnet Mask
Subnet Mask
0 0..00.
IP Address
Subnet Mask
TCP/IP Setting
Gateway
Gateway
0 0..00.
To Next Page
Loading...
Need help?
General
