Optional Equipment
4-8
4
While holding the staple holder with one hand and the
new staple cartridge with the other hand, insert the
cartridge into the holder with care about the direction.
Note The arrow on the staple cartridge indicates the insertion direction.
5
Push the staple cartridge all the way into the holder and
remove the paper tape around the staple cartridge by
pulling it.
6
Insert the staple holder into the insertion slot as it was.
Insert it completely until it clicks.
7
Close the stapler front cover.
Clearing Staple Jam
1
Remove the staple holder in the same way as
described in Adding Staples.
Hold knob A of the face plate of the staple holder with
your fingers and raise the plate.
A
To Next Page
Loading...
Need help?
General
