3-1
3 Basic Operation
This chapter explains the following operations. For other functions, refer to the Advanced
Operation Guide.
• Basic Copying Procedure
• Zoom Copying
• Duplex Copying
• Collated Copying
• Combined Copying
• Interrupt Mode
•Low Power Mode
•Sleep Mode
• Basic Printing Procedure
Basic Copying Procedure
1
Turn the main power switch on ( | ). At the end of
warm-up, the Start indicator lights up green.
2
Set the original onto the platen. Be sure to set the
original by aligning it with the left rear corner of the
platen along the original size indicator plates.
Note For the method of setting originals in the optional document processor, see Setting Originals in
the Document Processor on page 4-2.
3
Select the paper size. If Auto is displayed on the
message display, the paper of the same size as the
original is automatically selected.
Auto
1
100%
Ready to copy .
Auto
To Next Page
Loading...
Need help?
General
