Basic Operation
3-2
To change the paper size, press the Paper Selection
key to select the desired paper source.
4
Press the image quality mode select key to light up the
desired image quality mode indicator.
See the table below for image quality to choose.
5
Adjust the density either manually (manual density
mode) or automatically (auto density mode) with
automatic detection of the contrast of the original.
6
Press the numeric keys to set the desired number of copies (Up to 999).
7
Press the Start key to start copying.
8
Finished copies are delivered into the output tray.
Image quality mode Description
Text + Photo Select to copy originals that contain a mixture of both text and
photographs.
Text Select to copy originals that contain large amounts of text, such
as documents, etc.
Photo Select to copy originals that contain photographs.
To Next Page
Loading...
Need help?
General
