Utax CD 1218 User Manual

Preparations
2-12
Network (TCP/IP) Settings
Register the IP address of this machine.
Notes • To obtain the IP address to enter, check with your network administrator before performing this
setting.
• Before entering the IP address by following the instructions below, be sure to turn the DHCP
setting Off and the TCP/IP setting On.
1
Press the Print key.
2
Press the S key or the T key to select MENU.
3
Press the Enter key.
4
Press the S key or the T key to select Interface.
5
Press the Enter key.
6
Press the S key or the T key to select Network.
7
Press the Enter key.
8
Press the S key or the T key to select TCP/IP.
9
Press the Enter key.
10
Press the S key or the T key to select Change #.
11
Press the Enter key.
12
Press the S key or the T key to select IP Address.
13
Press the Enter key.
14
Use the numeric keys to input the IP address. Enter the
first block of 3 digits of the address in the highlighted
area.
GO
CANCEL
Ready
MENU
Back
Print Status Page
Menu
Interface
Back
USB
Interface
Network
Back
NetWare
Network setting:
TCP/IP
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
IP Address
0 0..00.

Utax CD 1218 Specifications

General

Brand	Utax
Model	CD 1218
Category	All in One Printer
Language	English