Basic Operation
3-8
1
Set the original.
2
Press the Duplex key.
3
Press the S key or the T key to select the desired
duplex copy mode.
4
Press the Enter key.
If you have selected 1 sided->2 sided, proceed to the next step.
If you have selected 2 sided->2 sided or Book->2-sided, proceed to step 7.
5
Press the S key or the T key to select the desired
finished stitch side.
6
Press the Enter key.
7
Press the Start key. Scanning of the original starts.
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
8
Replace the original and press the Start key. Scanning of the original starts.
9
If no original remains, press the Enter key. Copying starts.
Book
1 sided 2 sided
2 sided
2 sided
2-sided
Duplex/Split Page:
Saddle Stitch Direction:
Left side
Top side
To Next Page
Loading...
Need help?
General
