Utax P-4030 - Page 185

5-27
Operation on the Machine > Sending
WSD scan
1
Place the originals.
2
Display the screen.
1 Press the [Send] key.
2 Press the [▲] or [▼] key to select [WSD Scan] and press the [OK] key.
3
Scan the originals.
Procedure using this machine
1 Press the [▲] or [▼] key to select [From Oper. Panel], and press the [OK] key.
2 Press the [▲] or [▼] key to select the destination computer, and press the [OK] key.
You can view information on the selected computer by pressing [Detail].
3 Press the [Function Menu] key to set the type of original, file format, etc., as desired.
4 Press the [Start] key.
Sending begins and the software installed on the computer is activated.
Loading Originals (page 5-2)
21
Send to:
03
04
WSD Scan
05
Folder(SMB)
Folder(FTP)
21
WSD Scan:
From Computer
Exit
From Oper. Panel
01
02
21
Select Computer:
PC 01
PC 02
PC 03
DetailCancel