Utax P-4030 User Manual

8-9
Setup and Registration (System Menu) > System Menu
TCP/IP
Settings
Protocol Detail Select the settings for Protocol Detail.
NetBEUI Selects whether or not to receive documents using NetBEUI.
*1
Value: Off, On
SNMPv3 Select whether to communicate using SNMPv3.
*1
Value: Off, On
FTP(Server) Select whether or not to receive documents using FTP.
*1
Value: Off, On
FTP(Client) Select whether or not to send documents using FTP. When selecting [On], set
the FTP Port Number. Use the FTP default port 21.
Value: Off, On, Port 1 - 65535
SMB Select whether or not to send documents using SMB.
Value: Off, On, Port 1 - 65535
SNMP Select whether to communicate using SNMP.
*1
Value: Off, On
SMTP Select whether to send E-mail using SMTP.
Value: Off, On
POP3 Select whether or not to receive e-mail using POP3.
Value: Off, On
RAW Port Select whether to receive documents using Raw Port.
*1
Value: Off, On
LPD Select whether to receive documents using LPD.
*1
Value: Off, On
IPP Select whether to receive documents using IPP. When selecting [On], set the
IPP default Port Number. Use the SMB default port 631.
*1
Value: Off, On
IPP over SSL Select whether to receive documents using IPP over SSL.
*1
Value: Off, On
HTTP Select whether to communicate using HTTP.
*1
Value: Off, On
HTTPS Select whether to communicate using HTTPS.
*1
Value: Off, On
LDAP Select whether or not to use LDAP.
Value: Off, On
ThinPrint Select whether or not to use ThinPrint. When selecting [On], set the ThinPrint
Port Number. Use the ThinPrint default port 4000.
Value: Off, On, Port 1 - 32767
ThinPrintOverSSL Select whether or not to use ThinPrintOverSSL. SSL must be set to [On] in SSL
on page 8-11.
Value: Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description

Utax P-4030 Specifications

General

Brand	Utax
Model	P-4030
Category	Printer
Language	English