10-21
Troubleshooting > Troubleshooting
S
T
Message Checkpoints Corrective Actions
Reference
Page
Scanner memory is full.
Job is canceled.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on
Auto Error Clear, refer to Auto Err. Clear on page 8-27.
— Scanning cannot be performed any
more due to insufficient memory of
scanner. The job is canceled. Press
the [OK] key.
—
Send Error.
*1
— An error has occurred during
transmission. The job is canceled.
Press the [OK] key.
Refer to Responding to Send Error
for the error code and corrective
actions.
page 10-23
SSD error. Job is canceled. — An error has occurred on SSD. Job
is canceled. Press [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
—
Message Checkpoints Corrective Actions
Reference
Page
The slit glass requires
cleaning.
— Clean the slit glass using the dry
cloth.
page 10-2
The waste toner box is full. Is the waste toner box full? Replace the waste toner box. page 10-8
The waste toner box is
improperly installed.
— The waste toner box is not installed
correctly. Set it correctly.
page 10-8
This user account is locked
out.
Contact administrator
Job is canceled.
— Contact administrator.
The job is canceled. Press the [OK]
key.
―
Toner is low.
(Replace when empty.)
— It is almost time to replace the toner
container. Obtain a new toner
container.
―
To Next Page
Loading...
Need help?
General
