Utax P-4035 MFP Service Manual

2NM/2NX/2NY/2NZ/2P0/2P6
2-1-2
1. Control PWB (CONPWB)...................... Controls the software such as the print data processing and pro-
vides the interface with computers.
Controls printer hardware such as high voltage/bias output con-
trol, paper conveying system control, and fuser temperature con-
trol, etc.
2. Connect -Left PWB (C-LPWB).............. Consists of wiring relay circuit between control PWB and drum
connect PWB.
3. Connect-Right PWB (C-RPWB)............ Consists of wiring relay circuit between control PWB and power-
source PWB.
4. Operation panel PWB (OPPWB) *4 ...... Consists of wiring that relay circuit between control PWB and
right/left key PWB and LCD.
5. Key-Left PWB (K-LPWB) *4.................. Consists the LED indicators and key switches.
6. Key-Right PWB (K-RPWB) *4............... Consists the LED indicators and key switches.
7. High voltage PWB (HVPWB) ................ Generates main charging, developing bias, transfer bias and sep-
aration bias.
8. Power source PWB (PSPWB) .............. After full-wave rectification of AC power source input, switching
for converting to 24 V DC for output. Controls the fuser heater.
9. Drum PWB (DRPWB) ........................... Relays wirings from electrical components on the drum unit.
10. Drum connect PWB (DRCPWB) ........... Consists of wiring relay circuit between connect left PWB and the
drum unit.
11. Toner container PWB (TCONPWB) ...... Reads the container information.
12. Toner container connect PWB
(TCONCPWB)....................................... Consists of wiring relay circuit between control PWB and the
toner container.
13. CCD PWB (CCDPWB).......................... Reads the image of originals.
14. LED PWB (LEDPWB) ........................... Controls the LED.
15. APC PWB (APCPWB) .......................... Generates and controls the laser beam.
16. PD PWB (PDPWB) ............................... Controls horizontal synchronizing timing of laser beam.
17. Thermister connect PWB
(FTHCPWB).......................................... Consists of wiring relay circuit between fuser thermistor, fan motor
and the control PWB.
18. Operation panel PWB (OPPWB) *3 ...... Consists of wiring that relay circuit between control PWB and
LCD.

Utax P-4035 MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Duplex print speed (black, normal quality, A4/US Letter)	20 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
Copy speed (black, normal quality, A4)	40 cpm
Scan to	E-mail, File, Image, USB
Grayscale levels	256
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Faxing	Mono faxing
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 100 DPI
Fax transmission speed	3 sec/page
Digital sender	-
Printing colors	Black
Maximum duty cycle	- pages per month
Total input capacity	500 sheets
Total output capacity	250 sheets
Duplex media weight	60 - 120 g/m²
Paper tray media types	Envelopes
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Product color	Black, Grey
Market positioning	Business
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint
Standard interfaces	Ethernet, USB 2.0
Memory slots	1
Internal memory	512 MB
Compatible memory cards	SD
Sound power level (standby)	53 dB
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (standby)	54.7 W
Power consumption (average operating)	680 W

Weight and Dimensions

Depth	455 mm
Width	475 mm
Height	575 mm
Weight	21500 g