UTECH UT100 - Chapter 4: Operating Instructions

Chapter 4: Operating Instructions
UT100 Handheld Pulse Oximeter Operation Manual 4-1
Chapter 4: Operating Instructions
WARNING! Do not use an UT100 monitor, sensor, cables, or
connectors that appear to be damaged.
WARNING! This device must be used in conjunction with clinical signs
and symptoms. This device is only intended to be an
adjunct in patient assessment.
4.1 Unpacking the Monitor
1.
Carefully
remove the monitor and its accessories from the shipping
carton. Save the
pack ing
materials in case the monitor must be shipped
or
st or ed .
2. Compare the packing list with the supplies and
equipment
you received
to make sure
y ou
have everything
y ou
’ll
need .
4.2 Install the Batteries
Figure 4.1: Installing the Batteries
The oximeter uses 4 (four) standard “AA” alkaline or Ni-MH
cells
.