UTECH UT100 - Chapter 9: Specification; Equipment Classification; Spo; Pulse Rate

Chapter 9: Specifications
UT100 Handheld Pulse Oximeter Operation Manual 9-1
Chapter 9: Specification
9.1 Equipment Classification
Type of Protection Against
Electric shock:
Mode of operation:
Degree of Protection Against
ingress of Liquids:
Degree of Mobility:
Degree of Protection Against
Electric Shock:
Safety Requirements:
9.2 SpO
2
Range:
Accuracy:
Resolution:
Display Response:
9.3 Pulse Rate
Range:
Accuracy:
Resolution:
9.4 Default Settings of Alarms Limits
High Alarm Limits
Low Alarm Limits
Adult
Pediatric
N
eonatal
Adult
Pediatric
N
eonatal
SpO
2
99
99
99
92
92
92
PR
100
110
120
60
70
80
9.5 Power Requirements
AC power supply 100-240VAC, 47-63Hz
Or four standard “AA” alkaline or Ni-MH cells (IEC Type LR6)
0-100%
±2 at 70 - 100%
<70%, undefined
1%
The display is to functional saturation. The
pulse strength bar graph is not proportional
to pulse volume.
Internally Powered
Continuous
IPX1, drip proof
Portable
Type BF
EN60601-1:1990
30-250bpm
±2 at 30 – 250bpm
1bpm