Vacon 100 - Page 21

Communications vacon • 19
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
6
Instance Attribute “Product Code”
The Identity Object has an instance attribute named “Product Code” which has the Attribute Identi-
fier
03
h
. This attribute reveals the vendor-assigned product code for a particular product within a device type.
Two products shall have different product codes if their configuration and/or runtime options re dif-
ferent.
The data type of the attribute is UINT (16-bit). In Vacon 100, the Product Code is 100
d
(64
h
).
Instance Attribute “Revision”
The Identity Object has an instance attribute named “Revision” which has the Attribute Identifier
04
h
.
This attribute, which consists of Major and Minor Revision fields, identifies the revision of the item/
device that the Identity Object is representing. Both the Major and Minor fields are of data type
USINT (8-bit). The Major Revision is limited to values between 1 and 127, as the eighth bit is re-
served by CIP and is zero.
Instance Attribute “Status”
The Identity Object has an instance attribute named “Status” which has the Attribute Identifier 05
h
.
The value of the attribute presents the current status of the entire device.
The data type of the attribute is WORD (16-bit bitmask). The coding of the field is defined in the
table below.