Vacon 100 - CIP COMMON REQUIRED OBJECTS

6
vacon • 18 Communications
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
6.2 Common industrial objects implemented by the Vacon
®
100
6.2.1 CIP Common Required Objects
6.2.1.1 Identity Object, Class 0x01
The Identity Object provides identification of and general information about the device.
*Only reset type 0
Instance Attribute “Vendor ID”
The Identity Object has an instance attribute named “Vendor ID” which has the Attribute Identifier
01
h
. This attribute reveals the vendor ID number which is assigned to the device.
This number is assigned to vendors of CIP devices by the ODVA user organisation. The data type of
the attribute is UINT (16-bit). The vendor ID for Vacon Plc is 01BB
h
(443
d
).
Instance Attribute “Device Type”
The Identity Object has an instance attribute named “Device Type” which has the Attribute Identifier
02
h
. This attribute indicates which device profile is implemented by the device. The data type of the
attribute is UINT (16-bit). For Vacon drives this device number is 02
h
(“AC Drive” profile).
Table 7. The Identity Object
Class name Identity object
Class Identifier 01
h
Class Attributes Id Name Data Type Access Rule
1
h
Revision Unsigned16 Read-only
2
h
Max Instance Unsigned 6 Read-only
3
h
Number of Instances Unsigned16 Read-only
Class Services Id Name
1
h
Get_Attributes_All
0E
h
Get_Attributes_Single
Instance Attributes Id Name Data Type Access Rule
1
h
Vendor ID Unsigned16 Read-only
2
h
Device Type Unsigned16 Read-only
3
h
Product Code Unsigned16 Read-only
4
h
Revision Unsigned 8[2] Read-only
5
h
Status Unsigned 16 Read-only
6
h
Serial Number Unsigned32 Read-only
7
h
Product Name Short string Read-only
Instance Services Id Name
1
h
Get_Attributes_All
5
h
Reset*
0E
h
Get_Attribute_Single