Vacon 100 - Page 23

Communications vacon • 21
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
6
Reset type 0 means that the device represented by the Identity Object will as closely as possible
emulate cycling of power.
If an error is detected, an error response is returned. Otherwise a successful Reset response is
returned.
6.2.1.2 Message Router Object, Class 0x02
The Message Router Object is mandatory in all CIP devices. It provides a messaging connection
point through which a Client may address a service to any object class or instance in a target
device.
Although the object is mandatory, there are no mandatory attributes or services.
Vacon 100 drive does not currently implement any of the objects services or attributes.
6.2.1.3 Connection Manager Object, Class 0x06
The communication characteristics between applications in different devices are modeled using
Connection Objects. The entities (devices) involved in a connection are referred to as
end-points . A
Connection Manager is required in some CIP networks to control aspects of Connection object
instances.
The Connection Manager class allocates and manages the internal resources associated with both
I/O and Explicit Messaging connections.
Table 9.
Class Name Message Router Object
Class Identifier 02
h
Class Attributes Id Name Data Type Access Rule
-- - -
Class Services Id Name
--
Instance Attributes Id Name Data Type Access Rule
-- - -
Instance services Id Name
--