Vacon 100 - TCP;IP INTERFACE OBJECT

6
vacon • 24 Communications
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
6.2.1.4 TCP/IP Interface Object, Class 0xF5
TCP/IP Interface Object provides interface to configure device’s TCP/IP settings. With this object,
user is able to configure, for example, device’s IP address, network mask etc.
Instance Attribute “Status”
The TCP/IP Interface Object has an instance attribute named “Status” which has the Attribute
Identifier 01
h
. This attribute presents the status of the TCP/IP network interface.
The attribute has data type DWORD (32-bit).
Table 11.
Class Name TCP/IP Interface Object
Class Identifier F5
h
Class Attributes Id Name Data Type Access Rule
1
h
Revision Unsigned16 Read-only
2
h
Max Instance Unsigned16 Read-only
3
h
Number of Instances Unsigned16 Read-only
Class Services Id Name
1
h
Get_Attributes_All
0E
h
Get_Attribute_Single
Instance
Attributes
Id Name Data Type Access Rule
1
h
Status Unsigned32 Read-only
2
h
Configuration Capabil-
ity
Unsigned32 Read-only
3
h
Configuration Control Unsigned32 Read-write
4
h
Physical Link Object
Struct of:
Unsigned 16
EPATH
Read-only
5
h
Instance Configuration
Struct of:
Unsigned32[25
] String
Read-write
6
h
Host Name String Read-write
Instance Services Id Name
1
h
Get_Attributes_All
0E
h
Get_Attribute_Single
10
h
Set_Attribute_Single