RECEIPT OF DELIVERY vacon • 9
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
3
3. RECEIPT OF DELIVERY
Vacon NX frequency converters have undergone scrupulous tests and quality checks at the factory
before they are delivered to the customer. However, after unpacking the product, check that no
signs of transport damages are to be found on the product and that the delivery is complete
(compare the type designation of the product to the code below).
Should the drive have been damaged during the shipping, please contact primarily the cargo
insurance company or the carrier.
If the delivery does not correspond to your order, contact the supplier immediately.
In the small plastic bag included in the delivery you will find a silver
Drive modified
sticker. The
purpose of the sticker is to notify the service personnel about the modifications made in the
frequency converter. Attach the sticker to the equipment to avoid losing it. Should the frequency
converter be later modified (option board added, IP or EMC protection level changed), mark the
change in the sticker.
3.1 Type designation code
3.1.1 NX type designation
Figure 1. Vacon NXC type designation code
NX C 0000
A 2 L 0 SSG A1A20000C3
+
IFD
5
Product range: NXC = cabinet
Nominal current (low overload)
e.g. 0460= 460Aetc.
Nominal mains voltage (3-phase):
5 = 380–500Vac, 6 = 525–690Vac
Enclosure class:
2=IP21/Nema1(cabinet-mounted),
5 = IP54/Nema 12(cabinet-mounted)
Control keypad:
A = standard (alpha-numeric)
B = no local control keypad
F = dummy keypad
G = graphic display
EMC emission level EN61800-3:
L =2nd environment
T=ForITnetworks
Brake chopper
0 =No brakechopper, 1 =Integrated brake chopper
Control
F=standardFR9andNXC
N = standard IP00 FR10 and NXC with IP54 control unit enclosure
G = as Fbut varnished boards
O = as N but varnished boards
Cooling
S = standard air-cooled
Supply
S=6-pulse
T=12-pulse
R =Regenerative low-harmonic (AFE)
Option bo ards; each slot is represented by two characters where:
Ax = basic I/O board, Bx = expander I/O board,
Cx = fieldbus board, Dx = special bo
ard
NXC options
7001.emf
To Next Page
Loading...
Need help?
General
