Vacon nxp/c User Manual

CONTROL KEYPAD vacon • 89
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
9
Figure 56. Parameter locking
Start-up Wizard (P6.5.3)
The Start-up Wizard is a feature on the control keypad to facilitate the commissioning of the
frequency converter. If selected active (default), the Start-up Wizard prompts the operator for the
language and application of his/her choice plus for the values for a set of parameters common to
all applications as well as for a set of application-dependent parameters.
Always accept the value with the
Enter button , scroll options or change values with the Browser
buttons
(up and down arrows).
Set the Start-up Wizard active in the following way: In the System Menu, find page P6.5.3. Press the
Menu button right once to reach the edit mode. Use the Browser buttons to set value Yes and
confirm the selection with the
Enter button . If you want to deactivate the function follow the same
procedure and give the parameter value
No .
Figure 57. Activation of Start-up wizard
Multimonitoring items (P6.5.4)
Vacon alpha-numeric keypad features a display where you can monitor even three actual values at
the same time (see Chapter 9.3.1 and Chapter
Monitoring values in the manual of the application
you are using). On page P6.5.4 of the System Menu you can define if it is possible for the operator
to replace the values monitored with other values. See below.
Figure 58. Enabling the change of multimonitoring items
S1

S9
READY
I/Oterm
READY
I/O term
READY
I/O term
ent er
READY
I/O term
READ Y
I/O term
P1

P4
System Menu
Security
Parameter Lock
ChangeEnable
Parameter Lock
ChangeDisabl
Parameter Lock
ChangeEnable
11540_uk
READY
I/O term
READ Y
I/Oterm
READ Y
I/O term
enter
Startup wizard Startup wizard
No No
Startup wizard
Yes
CANCEL
CONFIRM
READ Y
I/O term
READ Y
I/O term
READ Y
I/O term
enter
Startup wizard Startup wizard
No No
Startup wizard
Yes
CANCEL
CONFIRM
11541_uk
READ Y
I/Oterm
READ Y
I/Oterm
enter
READ Y
I/Oterm
Multimon. items
ChangeEnable
Multimon. items Multimon. items
ChangeEnable ChangeDisable
11542_uk

Vacon nxp/c Specifications

General

Brand	Vacon
Model	nxp/c
Category	Controller
Language	English