Vaisala HMP4 - Configuration with Insight Software; Vaisala Insight Software; Connecting to Insight Software; Figure 22 Connecting Probe to Insight Using Indigo USB Adapter

5. Configuration with Insight software
5.1 Vaisala Insight software
Vaisala Insight software is a configuration software for Indigo-compatible devices. With the
Insight software, you can:
• See probe information and status
• See real-time measurement
• Record data up to 48 hours and export in CSV format
• Calibrate and adjust the probe
• Configure probe features such as measurement filtering, chemical purge, condensation
prevention, and serial communication
Microsoft Windowsâ operating system and Indigo USB adapter (item code USB2) or Vaisala
USB cable (item code 242659) required.
Download Vaisala Insight software at www.vaisala.com/insight.
5.2
Connecting to Insight software
• Computer with Microsoft Windowsâ operating system and Vaisala Insight
software installed
• Indigo USB adapter (item code USB2) or USB connection cable (item code
242659)
When connecting several devices at the same time, note that your
computer may not be able to supply enough power through its USB ports. Use
an externally powered USB hub that can supply >2 W for each port.
CAUTION!
Figure 22 Connecting probe to Insight using Indigo USB adapter
Chapter 5 – Configuration with Insight software
41