More information
‣
Configuring network connection on touchscreen (page 35)
‣
Configuring network connection in web interface (page 43)
2.8 Safety
Only licensed experts may install electrical components. They
must adhere to local and state legislation and regulations.
WARNING!
Make sure that you prepare and connect only de-energized wires.WARNING!
Transmitters powered with AC (mains) power must be connected
only to a grounded (earthed) power supply (class I equipment).
WARNING!
Only licensed experts may connect the AC (mains) power
connection to the power supply. A readily accessible disconnect device must
be incorporated in the fixed wiring.
WARNING!
Attach only Vaisala Indigo compatible probes to the transmitter.CAUTION!
Do not modify the unit or use it in ways not described in the
documentation. Improper modification or use may lead to safety hazards,
equipment damage, failure to perform according to specification, or decreased
equipment lifetime.
CAUTION!
The transmitter's Ethernet interface is designed to be used in
trusted network environments (trusted corporate LAN or VPN-based connection
over the Internet). Avoid connecting the transmitter directly to a public network
because the device can be attacked by a malicious user through the network.
CAUTION!
Indigo 520 User Guide M212287EN-A
14
To Next Page
Loading...
