Vaisala Indigo 500 Series - Figure 19 Network Settings in Web Interface

Figure 19 Network settings in web interface
1. Log in to the web interface as an administrator user.
2. Select Transmitter > Network.
3. Select the setting type:
• Select DHCP if the transmitter is in a network that assigns network settings
automatically.
• Select Static IP to configure network settings manually.
4. If you selected Static IP, fill in the rest of the fields with information provided by your local
network administrator:
IP address
The four part network ID of the transmitter.
Subnet mask
Used together with the IP address to determine which network the transmitter is a
part of.
Gateway
IP address of the server that enables the transmitter to access other networks.
DNS server 1 … 2
Public computer server that translates the domain name of the transmitter into an IP
address.
5. Select Save.
Indigo 520 User Guide M212287EN-A
44