Need help?Do you have a question about the Valeo ClimFill Maxi and is the answer not in the manual?
General| Brand | Valeo |
|---|---|
| Model | ClimFill Maxi |
| Category | Test Equipment |
| Language | English |
General safety instructions for operating the service station.
Guidelines for operating the equipment in a safe and well-ventilated environment.
Instructions for connecting the equipment to the mains power supply, including grounding.
Safety measures and PPE required when handling refrigerants and lubricants.
Restrictions on refrigerant types and modifications to safety devices.
Precautions for connecting hoses, checking pressures, and closing quick couplers.
Prohibited operations that can cause danger or damage to the equipment.
Description of safety devices like pressure switch, safety valve, and main switch.
Instructions for safe handling, storage, and conditions of refrigerant.
Explanation of touchscreen interface functions, navigation, and button operations.
Description of status bars indicating LP, HP, vessel pressure, and residual gas weight.
Description of various function keys like Refrigerant amount, System type, and Oil Injection.
Step-by-step guide on how to safely unpack the ClimFill® Maxi unit from its packaging.
Instructions on positioning the unit and connecting it to the mains power supply.
Detailed guidance on handling, positioning, and electrical connections for safe operation.
Procedure for the initial filling of the equipment's internal tank with refrigerant.
Selection between Q-Mode (Quick) and S-Mode (Suction) recharge methods.
Detailed explanation of the Q-Mode and S-Mode recharge procedures.
Connecting couplers and selecting the automatic service mode.
Setting parameters for automatic cycles like oil injection and vacuum phase.
Procedure for changing oil type and the required internal cleaning function.
Procedure for recovering refrigerant from the vehicle's A/C system.
Steps for performing the vacuum phase, setting time and test duration.
Procedure for injecting refrigerant, oil, and detection dye into the A/C system.
Procedure for checking A/C system pressures with the engine running.
Procedure for performing an internal leak test on the ClimFill® Maxi.
Using the PUMP MONITORING SYSTEM to extend vacuum pump oil life.
Instructions and equipment needed for replacing the dryer filter.
Procedure for filling the A/C service station tank with refrigerant.
To Next Page