ENGLISH 47 / 74 CAP. 11 - AUTOMATIC CYCLES
ClimFill Maxi
Besides storing the printout report data in the internal memory, the software
automatically saves the cycle settings and associates them to the vehicle registration
plate number, so that these settings can be reused for the same customer vehicle.
11.3.6 OIL TYPE REPLACEMENT
In order to set the oil type, press several times the present icon until the icon that will be
used for the service will appear (you can set only the following 4 types ).
(Only when switching to different types of PAG or POE oil).
By selecting an oil type different from that used for the previous service, at the START the
equipment will compulsorily require the performance of the internal cleaning function
called “ELECTRIC COMPRESSOR function” .
The ELECTRIC COMPRESSOR FUNCTION will either be
• “STANDARD”, allowing for cleaning of internal hoses only, or
• “EXTERNAL ELECTRIC COMPRESSOR FUNCTION KIT”, which also cleans the
external charge hoses (only if the specific kit is available and if enabled in the
settings menu).
The EXTERNAL ELECTRIC COMPRESSOR FUNCTION, in order to be performed, requires
connecting the HP quick coupler to the LP quick coupler through the HP-LP fitting
shown in the following picture, which is part of the EXTERNAL ELECTRIC COMPRESSOR
FUNCTION KIT (optional accessory).
Once the two couplers are connected together, follow the automatic procedure.
To Next Page
Loading...