CAP. 7 - INSTALLATION 32 / 74 ENGLISH
ClimFill Maxi
CAP. 7 - INSTALLATION
7.1 EQUIPMENT INSTALLATION
7.1.1 Unpacking ClimFill
®
Maxi
RISK OF OVERTURNING
The manufacturer disclaims all responsibility for damage to objects and/or persons
resulting from the equipment being wrongly removed from the pallet, or from the
operation being made by unsuitable personnel, with improper means/protections and
without complying with the existing laws on manual handling of loads and with the
operations described in this manual.
1) Cut the strap and remove the carton.
2) Cut the straps securing the unit to the pallet.
Remove the equipment from the pallet (2 operators required)
3)
Lift both front wheels by levering with
the front handles and on rear wheels (this
way the operators must not lift the full
weight of the unit)
4) Slowly lower the unit from the pallet by
means of the rear wheels
Keep the pallet, carton and scratch protection film for use when returning the unit. The
unit rolls on wheels; the two smaller wheels can be locked.
To Next Page
Loading...