ENGLISH 45 / 74 CAP. 11 - AUTOMATIC CYCLES
ClimFill Maxi
CAP. 11 - AUTOMATIC CYCLES
11.1 AUTOMATIC A/C SYSTEM SERVICE
It is necessary to connect both the LP (low pressure) – and HP (high pressure) couplers
to the vehicle A/C system (screw the valves only when required by the A/C station).
Select the service mode (manual or automatic) and follow instructions.
When the (automatic) service mode is selected, the following screen page is displayed.
11.2 AUTOMATIC CYCLE (BUSES)
Upon equipment switch-on, the menu of the database, with vehicles divided by maker,
model, and type of A/C system, is displayed (For the touchscreen use, see chap. 5.13).
5,13).
11.2.1 Last cycle
It loads the parameters of the last automatic cycle
11.2.2 User-defined cycles
It allows loading the parameters of the automatic cycle previously saved by the user.
11.2.3 Search parameters by vehicle registration plate number
It allows loading the parameters of the automatic cycle previously saved for a specific
vehicle identified by its registration plate number.
11.3 AUTOMATIC CYCLE (OTHER VEHICLES)
Upon equipment switch-on, the menu of the database, with vehicles divided by maker,
model, and type of A/C system, is displayed (For the touchscreen use, see chap. 5.13).
5,13).
11.3.1 Vehicle selection from database
VALEO SERVICE offers customers purchasing ClimFill
®
Maxi the possibility of enhancing
potentials of the product through the database.
This database contains all data related to the A/C system of most vehicles. Hence, it will
be possible to speed up the recharge operations of the system with the aid of the data
provided by the database. Type of vehicles
o European and Asian
o America
o Australian (option)
• Maker
• Model
• Version / engine capacity
• Year
• System
11.3.2 Last cycle
It loads the parameters of the last automatic cycle
To Next Page
Loading...