ENGLISH 27 / 74 CAP. 5 - GENERAL DESCRIPTION
ClimFill Maxi
performed through the ELECTRIC COMPRESSOR function (STANDARD
type with cleaning of only internal hoses or, if the function EXTERNAL
ELECTRIC COMPRESSOR FUNCTION KIT is enabled in the settings menu
and the specific kit is available, the EXTERNAL ELECTRIC COMPRESSOR
FUNCTION KIT function, which also cleans the external charge hoses)
By pressing the button, the heating belt of the refrigerant internal vessel
can be activated.
OFF ON
By pressing the button, you can choose whether to activate the leak
test in compliance with the standard SAE J2843 through the injection of
a small amount of refrigerant before the refrigerant injection phase.
OFF ON
Vacuum
phase
duration
By pressing for 2 seconds this button, you can change (arrow up or
down) the time of the vacuum phase (30 min. default) and the time of
vacuum holding (2 min. default).
Info
By pressing this key for at least 2 seconds, data relating to the selected
vehicle may be read, if the vehicle is included in the Autodata
database.
Component
position
By pressing this key for at least 2 seconds, the A/C system composition
of the selected vehicle may be displayed, if the vehicle is included in
the Autodata database.
Save
Hold down for at least 2 seconds to save data.
Value reset
Hold down for at least 2 seconds to cancel the values in the respective
menu.
Start
By pressing this button, you can start the selected function or the
complete cycle.
Home
Hold down for at least 2 seconds to return to the previous screen.
Print
Hold down to print out the latest service report.
To Next Page