126
The scraper must lock onto the shaft. Please check, whether the scraper is
firmly attached to the shaft and whether it is placed correctly.
It is strictly forbidden to put plastic parts (scrapers) of the appliance into the dishwasher
to clean them!
Incorrectly and correctly attached scraper:
insert the mixer into the cylinder:
Hold the mixer with both hands and place it very slowly into the cylinder. Place
the mixer by the edge of the cylinder so that the spade which has the slider
closest to the bottom of the cylinder is placed horizontally downwards, Slowly,
without spinning, push the thusly placed mixer towards the end of the cylinder.
When the mixer shaft is in bed, find the final position of the mixer in the bed of
the drive shaft by slowly spinning it in a clockwise direction.
insert the door seal rubber into the door;
To Next Page
Loading...
Need help?
General
