130
placing the batch feeder cover lid with safety net into the batch feeder
Close the batch feeder cover.
13.5 DISINFECTION OF THE KETTLE
Desinfections process:
make sure that the mixture treating control panel is in STOP state;
make sure that the outlet valve is properly set and well closed;
fill to the top of the kettle the disinfections mixture and close the cover lid;
press the MIXING key;
let the mixer rotates for ten seconds (max).
press the STOP / RESET key;
let the disinfecting mixture rest for 20 minutes.
While doing so, please pay
special attention to instructions of the disinfection agent manufacturer as well as
hygienic standards, which are valid in your country
.
open the outlet valve and empty the disinfections mixture from the
cylinder and close the outlet valve;
To Next Page
Loading...
Need help?
General
