51
1. Press the button
to connect the
machine to the set program (cooling).
2. Press the button to start the set
program (cooling).
7.2.1.3 key MIXING
The MIXING button activates the mixing into the kettle. The heating cycle
will be stopped automaically.
In inverter machine the set speed of the mixing is speed 5 which you can
change(+- 2 speeds).
For increase mixer speed press button and for decrease mixer speed press
button .
1. Press the button to start a low
continuos mixing.
2. The machine starts with speed 5 for 1200
seconds.
7.2.1.4 key HALF-KETTLE HEATING
When you have less than half mixture in kettle you must press - turn on the
HALF-KETTLE HEATING button !
All scrapers which are not fully covered with mixture must be removed from the
kettle mixture.
To Next Page
Loading...
