EasyManuals Logo
Home>Valmar>Ice Cream Maker>MULTY P TTi Series

Valmar MULTY P TTi Series User Manual

Valmar MULTY P TTi Series
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
134
The user of the machine must replace all of the mixer scrapers if:
any of the scrapers is crumbled or deformed;
any of the scrapers has a deformed spring;
the wear of any scraper is uneven;
the wear of any scraper deviates from the wear of other scrapers.
Disregarding the condition or wear of the scrapers, the user of the machine
should replace all of the scrapers after, at most, 600 hours of operation, or at
least once a year.
14.5.1 Wear of the scraper - message
When the machine reaches the 600 working hours on display shows message.
1. First carefully read the text and then press
the confirm button . The message
disappears until the first re-connected of the
machine at electrical supply.
2. First carefully read the text and then press
the RESET button . The
message permanently disappears.
It is necessary to keep record on the working hours of the mixer scrapers
(appendix A)!
It this way the user knows when mixer scrapers should be replaced.
It is strictly forbidden to put plastic parts (such as mixer scrapers) of the
appliance into the dishwasher to clean them!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valmar MULTY P TTi Series and is the answer not in the manual?

Valmar MULTY P TTi Series Specifications

General IconGeneral
BrandValmar
ModelMULTY P TTi Series
CategoryIce Cream Maker
LanguageEnglish

Related product manuals