Valon Multispot Laser - Page 3

6.2.10. Lens Selection 31
6.2.11. Setup 32
6.2.12. Service 33
6.3 Instructions for After Use 34
6.3.1. Turning off the system 34
7. Patterns 35
7.1. Square 36
7.2. Sector 36
7.3. Circle 37
7.4. Arc 37
7.5. Line 38
7.6. Spot repetition 38
8. Safety 39
8.1. Emergency Stop Button 39
8.2. Double Control 39
8.3. Eye Safety Instructions 40
8.3.1. Eye Safety Filter (OD > 5) 40
8.3.2. Laser Safety Eyewear Requirements 40
8.4. Caution for High Power 40
8.5. Prevention of unauthorized use 41
8.6. Requirements for the treatment room 41
9. Maintenance 42
9.1. User Maintenance 42
9.2. Essential performance and maintenance 42
10. Errors 43
10.1. Conrmable Errors 43
10.2. Non-conrmable Errors 44
10.3. Laser Heatsink Overtemperature 44
10.4. Warnings caused by the RTC4 card 44
10.5. Warnings caused by Spot Recognition 44
11. Troubleshooting 46
11.1. System does not turn on 46
11.2. Aiming beam not visible 46
11.3. Aiming beam not in focus 46
11.4. Aiming beam not correctly centered 47
11.5. Smart wheel not active 47
11.6. Foot switch not active 47
11.7. Error messages 47
12. System Labeling 48
Table of Contents