VAMP 59 - Electrical Safety Tests; Mechanical Tests

Technical description
9 Technical data
9.2 Tests and environmental
conditions
VM59.EN001
VAMP 24h support phone +358 (0)20 753 3264
195
9.2.2. Electrical safety tests
Test
Standard & Test class / level
Test value
- Impulse voltage withstand
EN 60255-5, class III
5 kV, 1.2/50 s, 0.5 J
- Dielectric test
EN 60255-5, class III
2 kV, 50 Hz
- Insulation resistance
EN 60255-5
- Protective bonding
resistance
EN 60255-27
- Power supply burden
IEC60255-1
9.2.3. Mechanical tests
Test
Standard & Test class / level
Test value
Device in operation
- Vibrations
IEC 60255-21-1, class II / IEC
60068-2-6, Fc
1Gn, 10Hz – 150 HZ
- Shocks
IEC 60255-21-2, class II / IEC
60068-2-27, Ea
10Gn/11ms
Device de-energized
- Vibrations
IEC 60255-21-1, class II / IEC
60068-2-6, Fc
2Gn, 10Hz – 150 HZ
- Shocks
IEC 60255-21-2, class II / IEC
60068-2-27, Ea
30Gn/11ms
- Bump
IEC 60255-21-2, class II / IEC
60068-2-27, Ea
20Gn/16ms