What to do if my VAT PLUTO has high discharge pressure?
If your VAT Refrigerator is experiencing high discharge pressure (higher than 240 psi), ensure that the condenser fan is functioning and that the airflow is sufficient. Also, verify that the condenser coil is free from dirt and debris. Finally, check the high-pressure switch and its continuity to the controller.
Why is the evaporator iced up in my VAT PLUTO Refrigerator?
If your VAT Refrigerator's evaporator is iced up, it may be due to a needed defrost, a plugged drain, or insufficient airflow. Inspect the evaporator condensation drain to ensure it is not blocked by dirt or a kinked hose.
General| Brand | VAT |
|---|---|
| Model | PLUTO Series |
| Category | Refrigerator |
| Language | English |
Explains DANGER, WARNING, CAUTION, NOTICE symbols.
Specifies the designed purpose of the refrigeration units.
Lists important safety precautions to follow during operation.
Describes the condenser unit and its mounting.
Describes the evaporator unit and its components.
How to set various parameters on the digital controller.
How to switch between Celsius and Fahrenheit units.
Explains how defrost mode operates automatically and manually.
Explains how heating mode is activated and functions.
Lists fault codes and their system responses.
Explains the vapor compression refrigeration cycle in cooling mode.
Describes the system's state when the set temperature is reached.
Explains frost removal and heat circulation processes.
Lists prerequisites and checks before unit installation.
Lists all tools and equipment needed for installation.
Provides dimensions for unit mounting.
Step-by-step guide for installing the condenser unit.
Instructions for mounting the evaporator unit.
Details on how to route and install refrigerant hoses.
Guides on connecting power cables for the unit.
Instructions for setting up the drain system.
Steps to install the controller unit.
Instructions for connecting the energy pack.
Procedure for performing leak tests on the system.
Steps for evacuating the system before charging.
Guidelines for charging the system with refrigerant.
Steps to test and start the refrigeration unit.
A checklist for verifying installation steps before operation.
Maintenance steps for the condenser and evaporator units.
Maintenance checks for battery and power connections.
Lists fault codes, descriptions, and action items.
Lists symptoms, possible problems, and action items.
Troubleshooting for common issues like no start, warm air, or insufficient cooling.
To Next Page