24
3.3.2 Standard Mode
This mode is invoked by touching “Standard” on the main screen.
From this mode, you can select one specific sub modes
① Mode information window
Displays the currently selected information such as imaging mode, patient type, and X-
ray setting values set at each mode.
② Normal resolution
Take images of the patient at normal resolution.
③ High resolution
Take images at high resolution.
④ Adult
i selection
Take images for the adult patient in an intelligent mode
⑤ Child
i selection
Take images for the child patient in an intelligent mode
⑥ kVp/mA
Adjust tube voltage and current for fine adjustment manually.
⑦ EXIT
Return to the main screen.
1
2
4
6
3 5
7
To Next Page
Loading...
