EasyManua.ls Logo

Vatech PaX-Primo - Chapter 8 Technical specifications; 8.1 Unit technical specifications

Vatech PaX-Primo
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
83
Chapter 8 Technical specifications
8.1 Unit technical specifications
8.1.1 General information
z X-ray beam: Fan Beam
z Reconstruction Algorithm: A real time reconstructing algorithm
z Dynamic Range: 14 bit
z Scan Time (sec) at normal: 9.7 sec (typical). (2~13.5 sec.)
z Rotating Unit Scan Angle (degree): 240
Actual rotating angle around the object
z X-ray Exposure Angle (degree): 220
Actual spanning angle to expose the object to X-Ray: In fact the instant that the rotating
unit turns by 10 degrees, the X-Ray exposure starts and stops at 10 degrees before the
rotating unit reaches the full rotation: 240-10-10=220
z Patient Position: Standing. Wheel chair-confined patients
z Patient Alignment: 3 guiding light beams
z Reconstruction Time: About 45sec
z Focal spot size: 0.35 X0.5 mm
z FDD (SID): 531.2 mm
z Magnification: 1.31
z Sensor type: CMOS (Area mode)
z Pixel pitch: 100um
z Image pixel size: 100um
z Active pixel array: 1504x60 pixels
z Active area: 150.4x6.0mm
z Data acquisition speed: 100Mbps: Ethernet communication
z Weight: 75 kg
Exposure angle
Rotating unit spanning angle

Table of Contents

Other manuals for Vatech PaX-Primo

Related product manuals