7
4. Leave a sufficient amount of clear space around the CPU to ensure that it is properly
ventilated.
5. X-ray equipment is hazardous to patients and the operator if you do not observe the
exposure safety factors and operating instructions.
6. The patient should wear a protective lead-lined shoulder apron, unless other Radiation
Protection Protocols apply locally.
7. Disinfect any parts of the Unit that come into contact with the patient and the operator
after each patient has been exposed to x-rays.
8. While adjusting the height of the Unit, ensure that the patient is kept clear of the
mechanism.
9. When the Unit is not in use, ensure that the ON/OFF switch is set to OFF (O).
10. Ask the patient to remain still until the Unit arm has stopped moving and the RESET
movement has completed.
11. DO NOT use this Unit in conjunction with oxygen-rich environments. This Unit is not
intended for use with flammable anesthetics or flammable agents.
To Next Page
Loading...
Need help?
General
