• PID adjustment
Do not change the value, but leave the factory setting “3°C - 37.4°F”..
• Unit 1 T. Offset
Do not change the value, but leave the factory setting “-5°C - 23°F”.
• Filling timeout
Do not change the value, but leave the factory setting “120”.
• Water filter
Do not change the value, but leave the factory setting “0”.
To access the technician menu, operate as follows exclusively from the left-hand
pushbutton panel:
• Simultaneously press the button “ ” (1) and the button “ ” (2) to
set the machine to OFF; the LED (3) will go off and the following will be shown
on the display:
11.26
OFF
• Press the button “ ” (1) to scroll through the menu.
Manuale_Replica2B Elettronica_Rev0_5lingue_03-2016.indd 32 19/04/16 17:28
To Next Page
Loading...
