Settings – heart rate intensity zones
You can now adjust the next intensity zone (e.g. zone 2).
The intensity zones are predefined.
You can individually adapt each of the intensity zones
to your training requirements.
Press the BIKE button to increase the value and the
TPC button to decrease the value.
Press the SET button to confirm your setting.
The response “Set OK” appears on the display.
If you want to configure further settings,
press the BIKE or TPC button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M6 returns to function mode.
To Next Page
Loading...
