Vectronix BT PLRF25C - Page 44

Troubleshooting PLRF25C-1.2en
44
D---- is displayed
after distance meas-
urement
Distance is outside the
specified range
Respect specified
measurement range
(see page 15)
Object too small or inaccurately
targeted
Respect factors affecting
measurement range
(see page 24)
Bad weather conditions
AZI---- is
displayed.
Tilt angle outside specified range Respect specified tilt angles
Digital magnetic compass
damaged
Contact customer support
INC---- is
displayed.
Tilt angle outside specified range Respect specified tilt angles
Tilt sensors are damaged Contact customer support
Problem Possible cause Solution