PLRF25C-1.2en Troubleshooting
45
D GATED is displayed
after distance meas-
urement
Measured distance is below
selected distance gate
Reduce or turn off the
distance gate (see page 29)
The following
symbols are
displayed during
azimuth measure-
ments:
_
_ _
_
_
_ _
_
_
_ _
_
_
_ _
_
The allowed inclination and / or tilt
angle has been exceeded
tilted too far upwards
tilted too far downwards
tilted too far to the right
tilted too far the left
Stay within specified incli-
nation and / or tilt angle
(see page 14)
Problem Possible cause Solution
To Next Page
Loading...
Need help?
General
