How to make the electronic reticle visible on Vectronix Measuring Instruments?
If the electronic reticle is not visible on your Vectronix Measuring Instruments, it is because 'ERET OF' is set in the configuration menu. Select 'ERET ON' in the configuration menu to make it visible.
What do the symbols mean during azimuth measurements on Vectronix BT PLRF25C Measuring Instruments?
If the following symbols are displayed during azimuth measurements on Vectronix Measuring Instruments: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _, it indicates that the allowed inclination and/or tilt angle has been exceeded. Stay within the specified inclination and/or tilt angle to resolve this.
General| Brand | Vectronix |
|---|---|
| Model | BT PLRF25C |
| Category | Measuring Instruments |
| Language | English |
Overview of the device and explanation of common symbols used.
Essential safety instructions, limitations, and hazard warnings for device operation.
Detailed technical specifications for optics, compass, rangefinder, and miscellaneous features.
Guide to instrument overview, battery replacement, diopter adjustment, and basic operations.
Factors affecting range/accuracy, and methods for complete, multiple, and two-point measurements.
Instructions for performing compass calibration, interpreting results, and resolving failures.
Explanation of declination concepts and procedures for setting/correcting it.
Overview and detailed steps for changing configuration, units, and interface settings.
Solutions for various problems including measurement failures, display errors, and calibration issues.
Guide to connecting the interface cable and transferring data to PC, PLGR, or DAGR.
Details on PC, PLGR, DAGR, and Bluetooth interface settings and integration.
Vectronix AG contact details for customer support and copyright notice.
To Next Page
